Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuel Pump Relay on a Fiat Panda

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Fuse box

Before starting, open the front bonnet of your Fiat Panda. The fuel pump relay is located inside the fuse box, which is in the engine compartment near the battery. Start by unclipping and removing the top cover of the fuse box. Then, extract the relay from its housing, and you will have completed the disassembly. To fit the new relay and close everything up, simply follow this brief procedure in reverse, and you will have completed the replacement.

Updated on 5 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the fuel pump of the Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Today's main steps will show us how to disassemble and replace the fuel pump of the Fiat Panda, following the instructions below. First, we open the …
How to Remove the Fuel Pump on a Fiat Panda 4x4 (169)
How to Remove the Fuel Pump on a Fiat Panda 4x4 (169)
Fiat Panda (2003-2012 / 169, MK 2) In this tutorial, you will learn how to remove and replace the fuel pump or low-pressure fuel sender on a Fiat Panda 4x4 (169). First, open the rear …
Disassembling Fuel Pump on Fiat Panda 1.2 Petrol
Disassembling Fuel Pump on Fiat Panda 1.2 Petrol
Fiat Panda (2003-2012 / 169, MK 2) In this tutorial video, you will learn how to disassemble and replace the fuel pump on a Fiat Panda 1.2 Petrol. First, remove the rear seat bench by …

Other guides you may be interested in

    Frequently Asked Questions

    • Panda 2012-2021 - What is the Fiat Panda brake light fuse? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos