Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Rear Light Bulb on a Fiat Punto Evo

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Tail light

See other generations:
Video tutorial

Before starting any maintenance operation on a car, always ensure it is on a ramp or flat surface to safeguard the operator's safety, allowing them to proceed with stability and security. Now, open the boot lid and using an appropriate star screwdriver, undo the two screws (located on the inner side of the light) that secure the rear light cluster you want to remove.

Disconnect the electrical supply and unscrew the component that holds all three bulb holders from the back of the light. To replace the bulb of interest, apply slight pressure on it and turn anti-clockwise.

Insert the new bulb and reassemble everything by reversing the steps seen.


Updated on 1 May 2026 by ScegliAuto


Related tutorials

How to Replace the LED in the Rear Light of the Fiat Punto Evo?
How to Replace the LED in the Rear Light of the Fiat Punto Evo?
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) To replace the LED in the rear light of the Fiat Punto Evo, open the boot and unscrew the bolts next to the light. This will allow you to remove the …
How to Replace the Bulbs of the Rear Light on a Fiat Punto Evo
How to Replace the Bulbs of the Rear Light on a Fiat Punto Evo
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Replace the bulbs of the rear light on a Fiat Punto Evo. Let's see how to remove the light and replace the bulbs: open the boot lid, unscrew the secu…
How to Remove the Rear Light of a Fiat Grande Punto
How to Remove the Rear Light of a Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In today's tutorial, you will see how to remove the rear light of a Fiat Grande Punto, a model produced from 2005 to 2018. First, open the boot of th…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos