Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Timing Belt on the Fiat 500X?

Model: Fiat 500 500 X - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Timing belt

See other generations:
Video tutorial

To replace the timing belt on the Fiat 500X, open the bonnet and access the engine compartment: the belt is located on the left side of the engine, so you can access it by removing the plastic cover on the side of the engine. This will allow you to loosen the central pin of the tensioner roller, reducing the tension of the belt so that it can be extracted from its housing.

The new belt can then be positioned around the pulleys and should be tensioned by tightening the pin of the tensioner roller.


Updated on 2 May 2026 by ScegliAuto


Related tutorials

How and when to change the timing belt of the Fiat 500 1.2?
How and when to change the timing belt of the Fiat 500 1.2?
Fiat 500 (2007-2021 / 312) This guide provides instructions on how and when to change the timing belt of the Fiat 500 with a 1.2 engine. The timing belt for this type of engine…
How to Replace the Timing Belt on a Fiat 500?
How to Replace the Timing Belt on a Fiat 500?
Fiat 500 (2007-2024 / 312) Today, tackle the replacement of the timing belt on your Fiat 500. First, open the bonnet and remove the air filter assembly along with the engine co…
How do you reset the Service light in the Fiat 500x?
How do you reset the Service light in the Fiat 500x?
Fiat 500 (2014-2022 / 500 X) It's time to service our Fiat 500x, the car presented and reviewed in the available video. We know what this entails, such as changing the engine oil…

    Frequently Asked Questions

    • 500 2007-2024 - How often should the Abarth 500's timing belt be replaced? Read answer

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos