Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fiat Punto 1.3 MultiJet Glow Plug Replacement

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Glow plugs

In this video, you will see how to remove and replace the glow plugs of a Fiat Punto 1.3 MultiJet, following these simple steps. First, open and lift the bonnet of your car; then disconnect the electrical connector located next to the engine cover and subsequently remove the cover, as well as the air filter box. At this point, disconnect the electrical connectors of the glow plugs and using a socket wrench with an extension, unscrew and extract the glow plugs, as shown in the video. Replace them by hand first, then tighten with the wrench!

Updated on 4 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Glow Plugs on a Fiat Grande Punto 1.3 MultiJet
Replacing Glow Plugs on a Fiat Grande Punto 1.3 MultiJet
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this video tutorial, you will learn how to remove and replace the glow plugs on a Fiat Grande Punto 1.3 MultiJet engine. First, open the bonnet an…
Removing the Glow Plugs on a Fiat Punto - Grande Punto 1.3 Multijet
Removing the Glow Plugs on a Fiat Punto - Grande Punto 1.3 Multijet
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In today's video tutorial, you will learn how to remove and replace the glow plugs on the Fiat Punto 1.3 Multijet, as well as on the Grande Punto and…
How to Replace the Glow Plugs on the Fiat Punto 1.3 MultiJet
How to Replace the Glow Plugs on the Fiat Punto 1.3 MultiJet
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Discover in this video how to remove and replace the glow plugs in the engine of the Fiat Punto second series, with a 1.3 MultiJet engine. First, ope…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos