Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Warning Light on a Fiat 500 Hybrid

Model: Fiat 500 312 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Tire pressure warning light

See other generations:
Video tutorial

This tutorial shows how to reset the tyre pressure warning light. Sit in the vehicle and check that the dashboard displays the tyre pressure sensor light.

Ensure the tyres are at the correct pressure, which you can check in the owner's manual. Remember that tyre rolling causes an increase in air pressure, so it is advisable to check and reset when the car is cold.

Once the tyre pressures are verified, with the ignition on and the engine off, press the "menu" button and use the "+" button to find the "Reset Tyres" option. Now press "menu" to enter and click again to confirm.

At this point, the light will turn off, and the tyre pressure values will be recorded in the system. Finally, find the "Exit Menu" option and confirm to exit.


Updated on 4 May 2026 by ScegliAuto


Related tutorials

How to Reset the TPMS Light on the Fiat 500 Hybrid
How to Reset the TPMS Light on the Fiat 500 Hybrid
Fiat 500 (2020-2026 / 500 E, 332) Resetting the TPMS light for the tyre pressure on the 2021 Fiat 500 Hybrid is a straightforward task to perform every time you check the tyre pressur…
How to Reset the Tyre Warning Light on the Fiat 500 Hybrid
How to Reset the Tyre Warning Light on the Fiat 500 Hybrid
Fiat 500 (2007-2024 / 312) In the following guide, you will find the few simple steps to complete the manual reset procedure for the tyre warning light on the instrument cluste…
How to reset the TPMS light on the Fiat 500 Hybrid.
How to reset the TPMS light on the Fiat 500 Hybrid.
Fiat 500 (2007-2024 / 312) To proceed with resetting the tire pressure warning light on the Fiat 500 hybrid, we need to turn on the instrument panel and press the menu button l…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos