Do it yourself
Frequently asked questions about cars and motorcycles

Removing the Dashboard on Fiat Grande Punto

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Dashboard

If you need to remove the central dashboard for painting or replacement, this brief tutorial will provide all the step-by-step instructions. The first step is to remove the radio and the upper air conditioning vents from the centre console by unscrewing only the retaining screws and without removing the lower climate controls. Now remove the plastic trim of the instrument cluster and extract the switch panel to the left of the steering wheel by unlocking the 3 metal clips located on the sides of the insert. The next step is to pull off the horizontal chrome trim on both sides of the dashboard, prying it off sideways with a screwdriver or flat tool. You can now proceed to remove the plastic parts, being careful with the long pieces that may break: therefore, equip yourself with patience and a flat screwdriver, and ensure that you have released all the clips before removing the plastics from the fascia.

Updated on 4 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) How to remove the glove compartment of a Fiat Grande Punto? Enter the car's interior and see how to dismantle the parts. Open the glove compartment a…
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Before starting, sit in the driver's seat of your Fiat Grande Punto. Begin by activating the instrument panel by turning the key in the ignition swit…
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In today's video, restore the correct functionality of the instrument cluster in the Fiat Grande Punto. This tutorial also applies to the later Punto…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos