Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Grille of a Fiat Bravo

Model: Fiat Bravo Bravo 2 - Years 2007-2014
Part: Grille

Before you start, exit the cabin of your Fiat Bravo and head to the front grille. Begin by releasing the clips that secure the front grille to its housing using your hands. Once the clips are released, the front grille will be free. Proceed to pull it out from its housing by simply pulling it towards you. After completing this step, you can fully remove the front grille of your Fiat Bravo, successfully finishing the disassembly.

Updated on 6 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Grille on a Fiat Bravo?
How to Remove the Front Grille on a Fiat Bravo?
Fiat Bravo (2007-2014 / Bravo 2) In this short tutorial, see how to remove and then replace the front grille on a Fiat Bravo, a very simple and quick operation. As shown, since it is…
How to remove the front light of a Fiat Bravo
How to remove the front light of a Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) As shown in this video tutorial, to remove the front light of a second-generation Fiat Bravo, produced from 2007 to 2014, you first need to remove pa…
How to Remove the Radio from a Fiat Bravo
How to Remove the Radio from a Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) How to replace the damaged stereo in a Fiat Bravo? Here’s how to remove it. Use the original metal keys to remove the stereo from the Fiat Bravo. Ins…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos