Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Dashboard Trim on a Fiat Panda

Model: Fiat Panda 141, MK 1 - Years 1980-2003
Part: Dashboard

In this guide, we will see the procedure to remove and replace the central trim of the dashboard on a Fiat Panda. First, get into the vehicle and use a very thin plastic lever to unclip and remove the dashboard trim; then disconnect the electrical connectors for the light and heating controls to remove it completely. At this point, replace the dashboard trim with the new one; insert it correctly and reassemble everything, following the video tutorial to the end for reassembly!

Updated on 8 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Fiat Panda (2003-2012 / 169, MK 2) After removing the car radio from its slot, installing a new radio on a Fiat Panda model 2 vehicle is a simple and quick operation to be carried out …
Fiat Panda (2003-2012 / 169, MK 2) Before you can begin, open the front bonnet of your Fiat Panda. Start by unscrewing and removing the screws that secure the front mask, then remove t…
Fiat Panda (2003-2012 / 169, MK 2) Before you can start, sit in the driver's seat of your Fiat Panda. It is strongly advised to perform this operation with the engine off, to avoid acc…

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos