Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Dashboard Lights in a Fiat Panda

Model: Fiat Panda 169, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Instrument panel light

See other generations:
Video tutorial

This video tutorial explains how to replace the dashboard lights not only in the Fiat Panda but in many cars on the road, making it useful for many. Start by disconnecting the battery cables for safety, then proceed to unscrew the lower locking pins of the dashboard, removing the panel under the steering wheel, which is also bolted.

Once this is done, remove the entire central dashboard panel, where the air conditioning knobs are located, followed by the trim and plastics of the instrument cluster, some of which are bolted and some are clipped, so remove them by pulling with your hands.

Now, when you reach the light panel, simply replace the bulbs of your choice.


Updated on 7 July 2026 by ScegliAuto


Related tutorials

How to replace the dashboard indicator bulb on a Fiat Panda
How to replace the dashboard indicator bulb on a Fiat Panda
Fiat Panda (2012-2026 / 319, MK 3) If the light illuminating the controls of the air vents on the Fiat Panda dashboard stops working, you need to replace the bulb. Gather some plastic …
How to Remove the Horn from a Fiat Panda
How to Remove the Horn from a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Before you can begin, open the front bonnet of your Fiat Panda. Start by unscrewing and removing the screws that secure the front mask, then remove t…
How to Replace the Gear Knob on a Fiat Panda?
Fiat Panda (2003-2012 / 169, MK 2) Before you can start, sit in the driver's seat of your Fiat Panda. It is strongly advised to perform this operation with the engine off, to avoid acc…

Other guides you may be interested in

How to Set the Clock on a Renault Master 3

This guide shows you how to set a new time on a Renault Master 3. Start by turning on the instrument cluster of the vehicle without starting the engine. Next, using the end of the right-hand steering column stalk, scroll through the options on the display until you reach 'set time', then press the down arrow button to make the displayed time blink. Once this is done, press and hold the down arrow button to change the hour, which you can adjust using the two arrow buttons at the end of the stalk. Once the correct hour is set, press and hold the down arrow button again to move to the minutes. After setting the correct time, restart the vehicle.

Watch the video!


by ScegliAuto

More videos