Do it yourself
| ||||
|
Fiat 500 - Video tutorial
Model: Fiat 500
312
- Years 2007-2021 In this video tutorial you can see where the fuse box is located on the Fiat 500. In the Fiat 500 there are two fuse boxes: the first is located on the driver's side under the dashboard; the internal fuse panel is part of the body control module (BCM). The other fuse box is located under the hood on the right side of the engine compartment, next to the battery. To access it, unscrew the screw, press the release tabs and remove the cover. In each fuse there is an identification number which corresponds to the electrical component, (See on the back of the cover). Then proceed to remove the damaged fuse, using pliers and then replace it with a working one that has the same amperage.
Posted on 10 April 2024 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the tire pressure warning light on Dacia Sandero?Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.108
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |