Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : How to remove the Fiat 500 Abarth steering wheel buttons

Fiat 500 - Video tutorial

Model: Fiat 500 312 - Years 2007-2021
Part: Push button
Operation: How to remove the Fiat 500 Abarth steering wheel buttons

Let's see in this short guide how to remove the Fiat 500 Abarth steering wheel controls or buttons. First of all we open the bonnet of our car and we begin to disconnect our battery beforehand; then we get in the car and remove the steering wheel airbag, disconnecting the electrical connector, as shown in the video. At this point we proceed with the removal of the buttons, using a thin plastic lever; disconnect the electrical wiring and replace, if necessary, the push-button panel, applying the reverse procedure for reassembly!


Posted on 11 April 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos