Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Key of the Fiat Punto

Model: Fiat Punto MK 2, 188 - Years 1999-2011
Part: Key

If you are experiencing serious operational issues with your Fiat Punto key and the causes are not related to a flat battery or physical damage, you will likely need to reset it manually. To do this, follow the instructions below. First, completely switch off the car and disconnect the negative terminal of the battery. Next, enter the vehicle, insert the key, and hold it in position for about 4-5 seconds. After that, remove the key, reconnect the negative battery cable, and ensure all the car doors are closed properly. The reset is complete.

Updated on 11 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the fog light bulb of the Fiat Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Let's see how to proceed in case we need to replace the fog light bulb of the Fiat Punto. Let's position ourselves in front of the headlight that con…
How do you program the key for the Fiat Punto?
How do you program the key for the Fiat Punto?
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In order to program the key of the Fiat Punto, you need to insert it into the ignition switch, and then connect a diagnostic tool to the OBD port of …
Remove Key for Fiat Grande Punto
Remove Key for Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Is the battery in the Fiat Grande Punto key due for a change? Here’s how to replace it. Take your ignition key and use a screwdriver to unscrew the r…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos