Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Airbag and Horn Button on the Fiat Punto 188

Model: Fiat Punto MK 2, 188 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Airbag

See other generations:
Video tutorial

In today's tutorial, you will learn how to remove the steering wheel airbag along with the horn button on the Fiat Punto 188 by following these simple steps. First, get in the vehicle and start by removing the airbag; to do this, undo the fixing screws located on the back of the steering wheel, on the plastic cover.

Once released, you can remove the airbag by disconnecting the electrical connector; then, separate the horn button from the steering wheel airbag for replacement. Finally, apply the reverse procedure for reassembly!


Updated on 12 May 2026 by ScegliAuto


Related tutorials

How to Replace the Horn on the Fiat Punto
How to Replace the Horn on the Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) In this short and simple guide, you will see the steps to remove and replace the horn on the Fiat Punto, following the instructions below. First, ope…
Removing Horn from Fiat Grande Punto
Removing Horn from Fiat Grande Punto
Fiat Punto (1999-2011 / MK 2, 188) In today's tutorial, learn how to remove the horn from a Fiat Grande Punto. First, open and lift the bonnet and remove the grille by unscrewing the s…
How to Remove the Driver's Side Airbag in the Fiat Grande Punto
How to Remove the Driver's Side Airbag in the Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) To remove the airbag from the Fiat Grande Punto, start by removing the horn fuse to prevent any sounds while you proceed with the operation. Locate t…

Other guides you may be interested in

    Frequently Asked Questions

    • Punto 2005-2018 - Where is the Fiat Punto Evo 2010 airbag control unit located? Read answer

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos