Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Engine Oil and Oil Filter on a Fiat Siena

Model: Fiat Siena MK 1 - Years 1996-2017
Part: Engine oil

Today, you will see the procedure to change the engine oil and oil filter on a Fiat Siena in simple and quick steps. First, lift the vehicle and start unscrewing the oil drain bolt located on the oil pan, allowing it to drain into a container for about ten minutes. Then, unscrew the oil filter cartridge, which is located at the bottom on the front, removing it and replacing it with a new one. Finally, open the hood and unscrew the filler cap; top off with new oil, filling it to the proper level!

Updated on 26 May 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Fiat Siena (1996-2017 / MK 1) To change the engine oil on the vehicle, follow these instructions: First, open the hood and remove the oil filler cap. Then, lift the car and locate…
Fiat Siena (1996-2017 / MK 1) In this tutorial, see how to replace the cabin filter in a Fiat Siena. For this simple and quick operation, you won't need any special tools. The fil…
Fiat Siena (1996-2017 / MK 1) In this tutorial, you will see how to replace the cabin air filter in a Fiat Siena, a very simple and quick operation. You will only need a Phillips …

Other guides you may be interested in

How to Replace the Diesel Filter of the Peugeot 3008 1.5 BlueHDI

Briefly, we will see the main instructions for dismantling and replacing the diesel filter of the Peugeot 3008 1.5 BlueHDI. First, locate the diesel filter under the vehicle, so it will be necessary to lift it; then disconnect the electrical connector and the fuel lines from the filter, unscrewing the side screws to remove the cartridge, as shown in the video. At this point, replace the diesel filter with the new one, as well as with the original one; then reconnect the pipes and the electrical connector, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos