Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Clutch Cable on the Fiat 600?

Model: Fiat 600 MK 1 - Years: 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966
Part: Clutch

Video tutorial

To replace the clutch cable on the Fiat 600, lift the carpet covering the terminal with the spring to which the cable is connected. To detach the cable, you will need to remove the transverse fixing pin and disconnect it from the spring; subsequently, the cable must be pulled out from the underside of the car and also disconnected from the clutch pedal itself.

Once the old cable has been removed, you can replace it with a new spare part, which should then be properly connected to the clutch and also to the other terminal.


Updated on 30 May 2026 by ScegliAuto


Related tutorials

How to Remove the Steering Wheel from a Fiat 600?
How to Remove the Steering Wheel from a Fiat 600?
Fiat 600 (1955-1969 / MK 1) To remove the steering wheel from a Fiat 600, use a screwdriver to pry off the circular cover located at the centre of the wheel. Once this cover is …
How to Dismantle the Carburettor on a Fiat 600 D 750
How to Dismantle the Carburettor on a Fiat 600 D 750
Fiat 600 (1955-1969 / MK 1) In this video tutorial, we will see how to dismantle and service the carburettor on the Fiat 600 D first series, with a 750 engine, as well as on the…
How to Replace the Alternator Belt on the Fiat Seicento
How to Replace the Alternator Belt on the Fiat Seicento
Fiat 600 (1955-1969 / MK 1) In this video, you can see the steps to remove the alternator belt on the Fiat Seicento. Removing the alternator belt on the Fiat Seicento is not too…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos