Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Steering Wheel from a Fiat 600?

Model: Fiat 600 MK 1 - Years 1955-1969
Part: Steering wheel

To remove the steering wheel from a Fiat 600, use a screwdriver to pry off the circular cover located at the centre of the wheel. Once this cover is removed, you can unscrew the pin located underneath using a socket wrench. After loosening this pin, you can completely detach the steering from the column, allowing you to install a new one. This should be secured with the central pin, which will then be covered with the circular cover.

Updated on 27 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Fiat 600 (1955-1969 / MK 1) In this video tutorial, we will see how to dismantle and service the carburettor on the Fiat 600 D first series, with a 750 engine, as well as on the…
Fiat 600 (1955-1969 / MK 1) To replace the clutch cable on the Fiat 600, lift the carpet covering the terminal with the spring to which the cable is connected. To detach the cab…
Fiat 600 (1955-1969 / MK 1) In this video, you can see the steps to remove the alternator belt on the Fiat Seicento. Removing the alternator belt on the Fiat Seicento is not too…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos