Do it yourself
| ||||
|
Fiat 600 - Video tutorial
Model: Fiat 600
MK 1
- Years 1955-1969 In this video tutorial we will see how to disassemble and overhaul the carburetor on the first series Fiat 600 D, with 750 engine, but also on the vintage Fiat 500. First we open the rear engine hood and start by removing the air filter box, fixed to the carburetor; after which we unscrew the bolts that connect the filter box to the exhaust manifold, as shown in the video. At this point we unscrew the carburetor fixing nuts and disconnect the accelerator cable; once the carburetor has been removed we go to carry out maintenance, replacing the gaskets and cleaning!
Posted on 20 April 2024 by ScegliAuto
Other guides that may interest you
|
How to reset the tire pressure warning light on Dacia Sandero?Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.038
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |