Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fiat Ducato 2.8 JTD gearbox oil replacement

Model: Fiat Ducato - Years 2002-2006
Part: Transmission fluid

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Posted on 28 April 2023 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the gearbox oil on a Fiat Ducato?
How do you replace the gearbox oil on a Fiat Ducato?
Fiat Ducato (2006-2014 / X250) Changing the gearbox oil on the Fiat Ducato is carried out by lifting the vehicle, so that you can access the lower part of the engine compartment: h…
How do you replace the gearbox oil on a Fiat Ducato?
How do you replace the gearbox oil on a Fiat Ducato?
Fiat Ducato (2014-2024 / X290) In order to replace the gearbox oil on the Fiat Ducato, the vehicle must be lifted so that the lower part of the engine compartment can be accessed: …
How do you replace the timing belt on the Fiat Ducato 2.8 JTD?
How do you replace the timing belt on the Fiat Ducato 2.8 JTD?
Fiat Ducato (2002-2006 / ) In order to replace the timing belt of the Fiat Ducato 2.8 JTD, the vehicle must be lifted so that the front right wheel and the relative wheel arch …

Other guides you may be interested in

How to Install Roof Bars on a Fiat 500L

Learn how to fit universal roof bars on a Fiat 500L. These bars are used on vehicles with or without roof rails. Assemble the roof bar kit (as shown in the video) with bars adjusted to the width of the vehicle (measure with a tape measure). Position the brackets at both ends of the doors on the vehicle's original roof rails. Once the anchoring bracket width is set, tighten the bolts with a butterfly nut (if a lock is present) until fully secured to the roof rails. Fit safety caps on both sides.

Watch the video!


by ScegliAuto

More videos