Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Qubo
    4. : Fiat Qubo fuse diagram

Fiat Qubo - Video tutorial

Model: Fiat Qubo MK 1 - Years 2008-2019
Part: Fuse box
Operation: Fiat Qubo fuse diagram

On this model of vehicle the fuses are collected in two boxes which are located one in the engine compartment on the left side next to the battery and one in the passenger compartment at the bottom left next to the driver's side door. The cigarette lighter or power socket fuse on this model is marked with numbers 15 and 85 and is located in the fuse box in the engine compartment. In this last fuse box we will also find the fuse of the horn, stop lights, air conditioner compressor, electric door mirrors, heated rear window, fuel pump, fog lights and reversing lights.


Posted on 21 July 2022 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Qubo 2008-2019 - What is the fuse for the cigarette lighter in the Fiat Qubo? Read Answer
    • Qubo 2008-2019 - How much does the car radio fuse cost of a Fiat Qubo? Read Answer
    • Qubo 2008-2019 - Where is the fuse box of the Fiat qubo located? Read Answer
    • Qubo 2008-2019 - Where are the fuses of the Fiat Qubo located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos