Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to repair the air fan on a Fiat Ducato.

Model: Fiat Ducato MK 2 - Years 1993-2016
Part: Blower motor

In this video tutorial we can see how it is possible to repair the air fan on a Fiat Ducato, following a few simple steps: the first thing to do is to remove the selector located under the dashboard on the passenger side, then remove the two screws holding it in place and remove the pin. Once we have removed the selector, we must also remove the fan which is also located under the dashboard on the passenger side and remove the plug and test if it works; if it doesn't work we have to clean and unblock the fan with the WD-40 spray. Then we proceed to replace the selector if it does not work otherwise just clean the selector well and reassemble the working fan and the selector in place. Next step we turn on the engine to check the correct functioning of the previously disassembled parts.

Posted on 10 August 2022 by ScegliAuto

Video tutorial

Related tutorials

How does the Fiat Ducato radiator fan work?
How does the Fiat Ducato radiator fan work?
Fiat Ducato (1993-2016 / MK 2) The radiator fan of the Fiat Ducato is activated whenever the engine temperature is too high and therefore the fan must start to lower it. The operat…
How do i repair the sliding door of a Fiat Ducato?
How do i repair the sliding door of a Fiat Ducato?
Fiat Ducato (2006-2014 / X250) To repair the sliding door of the Fiat Ducato, you must first remove the panel on the inside of the door: this will simply have to be disengaged by l…
How to Remove the Fan Control Knob in a Fiat Ducato
How to Remove the Fan Control Knob in a Fiat Ducato
Fiat Ducato (2002-2006 / ) To remove the knob that controls the fan inside the Fiat Ducato's cabin, first remove the plastic panel that houses the air control knobs. To do this…

Other guides you may be interested in

How to Replace the Lift Supports on a Porsche 911

How to remove and replace the lift supports for the hood on a Porsche 911? Let's see how to replace them in this video: Lift the hood and secure it. Use a screwdriver or metal lever to detach the clips that hold the lift support at both ends (or unscrew the mounting pins). Install the new part onto the sheet metal of the front trunk, securing the lift support with the clips/pins. Proceed in the same manner for the removal/installation of the opposite lift support. Finally, test the gas springs installed earlier.

Watch the video!


by ScegliAuto

More videos