Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Timing Belt on the Fiat 500?

Model: Fiat 500 - Years 2007-2021
Part: Timing belt

To replace the timing belt on the Fiat 500, open the bonnet to access the engine compartment, specifically on the left side of the engine block where the belt and pulleys are located. To gain access, you will need to remove the air filter box and the associated duct: at this point, the central pins of the pulleys can be removed, reducing the tension on the belt, allowing you to remove it. The new belt can then be installed, the pulley nuts should be tightened, and the air filter box can be reinstalled.

Updated on 9 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Timing Belt on a Fiat 500?
How to Replace the Timing Belt on a Fiat 500?
Fiat 500 (2007-2024 / 312) Today, tackle the replacement of the timing belt on your Fiat 500. First, open the bonnet and remove the air filter assembly along with the engine co…
How and when to change the timing belt of the Fiat 500 1.2?
How and when to change the timing belt of the Fiat 500 1.2?
Fiat 500 (2007-2021 / 312) This guide provides instructions on how and when to change the timing belt of the Fiat 500 with a 1.2 engine. The timing belt for this type of engine…
Replacement of the timing belt of the Fiat 500 1.2
Replacement of the timing belt of the Fiat 500 1.2
Fiat 500 (2007-2024 / 312) Today we will see the guidelines for replacing the timing belt of the Fiat 500 1.2. First, we open the hood and start disassembling and removing the …

Other guides you may be interested in

    Frequently Asked Questions

    • 500 2007-2021 - When to replace the Abarth 500 timing belt? Read answer
    • 500 2007-2024 - How often should the Abarth 500's timing belt be replaced? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos