Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter in the Fiat Panda

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Air filter

Replacing the air filter is one of the simplest yet most important operations to perform on your car. It takes only a few minutes to complete and can easily be done independently. If you do not know how to do it, follow this guide and you will have no problems. First, lift the front bonnet and then, using a 7-millimetre spanner, unscrew the three screws located at the top of the plastic engine cover. Remove the cover, and right underneath, you will have access to the used air filter. Replace it with a new one, and finally, correctly reposition the cover by screwing in the previously removed screws. When finished, lower the bonnet.

Updated on 10 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Air Filter on a Fiat Panda
How to Remove the Air Filter on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Before starting, open the bonnet of your Fiat Panda to gain access to the engine bay. Begin by unfastening the securing clips of the air filter cover…
How to Remove the Air Filter on a Fiat Panda
How to Remove the Air Filter on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Before you can start, open the bonnet of your Fiat Panda to access the engine bay. Begin by unfastening the clips that secure the air filter cover. T…
Removing the Engine Air Filter on a Fiat Panda
Removing the Engine Air Filter on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Do you want to replace the air filter on a Fiat Panda? Let's see how to remove the air filter from inside the engine bay. Open and lift the front bon…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos