Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Service Light on a Fiat Ducato Van

Model: Fiat Ducato X250 - Years 2006-2014
Part: Service warning light

In this video, you will see how to reset the oil service light on a Fiat Ducato van, a very simple and quick operation to follow only after changing the oil and the corresponding filter. First, turn on the ignition without starting the engine. Then, press the accelerator pedal fully down and simultaneously press the brake pedal seven times. Once done, hold the accelerator for 60 seconds, turn off the ignition, and wait another 60 seconds before turning it back on to check if the procedure was successful. If it does not work, repeat the operation ensuring you follow the timing.

Updated on 11 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a 2013 Fiat Ducato
Fiat Ducato (2006-2014 / X250) In this video tutorial, you will find instructions on how to perform the routine maintenance service and reset the service light on a 2013 Fiat Ducat…
Resetting the service light on a Fiat Ducato
Resetting the service light on a Fiat Ducato
Fiat Ducato (1981-1993 / MK 1) Hello! Today we will explain how to reset the service light on a Fiat Ducato. It is important to remember that this step should only be done after pe…
How to Reset the Service on a Fiat Ducato
How to Reset the Service on a Fiat Ducato
Fiat Ducato (2014-2026 / X290) In today's video, see how to reset the service interval on the Fiat Ducato. This tutorial also applies to the Peugeot Boxer and Citroen Jumper twins.…

Other guides you may be interested in

    Frequently Asked Questions

    • Ducato 2014-2026 - How to reset the service warning light on Fiat Ducato? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos