Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Service Light on a Fiat 500L 1.3 Multijet

Model: Fiat 500 500 X - Years 2014-2022
Part: Service warning light

Enter the vehicle and close the door. Press the engine start button to turn on the ignition. On the left side of the steering wheel controls, repeatedly press the right arrow button and scroll through the menu following the instructions displayed in the centre of the dashboard until you reach: "oil change service". To reset the service light, fully depress the accelerator pedal three times. At this point, press the left arrow button on the left side of the steering wheel to exit the service menu. Turn off the ignition and turn it back on to verify the service light has been reset.

Updated on 18 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Service Light on a Fiat 500L?
How to Reset the Oil Service Light on a Fiat 500L?
Fiat 500 (2012-2023 / 500 L) To reset the Oil Service light on a Fiat 500L, you must first change the oil. After the oil has been replaced, enter the cabin and turn on the igniti…
Replacing the Glow Plugs on a Fiat 500L 1.3 Multijet
Replacing the Glow Plugs on a Fiat 500L 1.3 Multijet
Fiat 500 (2012-2023 / 500 L) In this brief guide, find the instructions to remove and replace the glow plugs on the Fiat 500L with a 1.3 Multijet engine. First, open the bonnet o…
How to Reset the Service Light on the Fiat 500L
How to Reset the Service Light on the Fiat 500L
Fiat 500 (2012-2023 / 500 L) Today, we will show you how to reset the service light for routine maintenance after an oil change on a Fiat 500L, following these simple steps. Firs…

Other guides you may be interested in

    Frequently Asked Questions

    • 500 2014-2022 - What does the oil warning light indicate in the Fiat 500X? Read answer
    • 500 2014-2022 - How to reset the service warning light on the Fiat 500X? Read answer
    • 500 2007-2024 - How to reset the Abarth 595 Service warning light? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos