Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Warning Light on the Fiat 500x

Model: Fiat 500 500 X - Years 2014-2022
Part: Tire pressure warning light

To reset the low tyre pressure warning light, follow these steps: Open the door and access the driver's seat, turn the key and switch on the ignition (do not start the engine), locate the "up arrow" and "down arrow" buttons on the left side of the steering wheel, press one of them until the central display shows "tyre pressure". The display will then show "press ok to reset"; on the left side steering wheel controls, there is an "ok" button, press this button and hold it until the warning light resets.

Updated on 21 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the "TPMS" Light on a Fiat 500X
How to Reset the "TPMS" Light on a Fiat 500X
Fiat 500 (2014-2022 / 500 X) Before you begin, sit in the driver's seat of your Fiat 500X. Start by selecting the vehicle settings page using the selection arrows on the steering…
Resetting Tyre Pressure Light on Fiat 500X
Resetting Tyre Pressure Light on Fiat 500X
Fiat 500 (2014-2022 / 500 X) To reset the tyre pressure warning light on a Fiat 500X, turn on the ignition with the key, scroll through the menu using the buttons on the steering…
How do you reset the tire pressure warning light on the Fiat 500X?
How do you reset the tire pressure warning light on the Fiat 500X?
Fiat 500 (2014-2022 / 500 X) In order to reset the tire pressure warning light of the Fiat 500X, you will need to first check the correct tire pressure values and inflate the tir…

Other guides you may be interested in

    Frequently Asked Questions

    • 500 2007-2021 - What does the Fiat 500 tire pressure warning light mean? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos