Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : How to replace the Fiat 500 air filter

Fiat 500 - Video tutorial

Model: Fiat 500 312 - Years 2007-2022
Part: Air filter
Operation: How to replace the Fiat 500 air filter

Replacing the air filter installed in your new Fiat 500 is one of the simplest and fastest operations that you can do on your own. All you need to do is read the following mini-guide carefully and put the various steps described into practice. First shut off the engine and let it cool down sufficiently. Then lift the hood all the way up and locate the filter box at the front of the compartment. Unscrew the three screws with a cross screwdriver and open the protective cover. Now remove the old filter and replace it with a new one. Finally, put the cover back on correctly and screw the screws back on.


Posted on 9 April 2023 by ScegliAuto

    Frequently Asked Questions

    • 500 2012-2021 - Where is the cabin filter located in the Fiat 500? Read Answer
    • 500 2014-2022 - Where is the Fiat 500x cabin air filter located? Read Answer
    • 500 2014-2022 - Costs for replacing engine and passenger compartment air filters for Fiat 500 x mjt? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos