Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the halogen dipped beam on a Fiat Tipo with a LED one

Model: Fiat Tipo 356, 357, 358 - Years 2016-2026
Part: Headlight

Replace the dipped beam headlights on your Fiat Tipo with LED ones. This video presents a type that does not particularly annoy those you meet at night, which is certainly a good thing, as it is unpleasant to face headlights that shine directly in your face. On the other hand, even on the most common e-commerce platforms, a pair of these bulbs costs a considerable amount, just under £80. Access the dipped beam bulb from the engine bay, and after removing the old bulb, note that there is a flange provided with the new bulb that must align properly with the bulb holder. Close the spring and position the bulb, inserting the connectors. Be careful as the connectors have polarity, so ensure it is correct. Adjust the bulb by checking that it is rotated in the right direction, turning on the headlights aimed at a wall. Refit the cover. Perform the same operation on the other side. The job is complete.

Updated on 5 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Fiat Tipo (2016-2026 / 356, 357, 358) Today you will learn how to replace the interior light bulb on your Fiat Tipo with an LED bulb. First, remove the cover of the bulb holder; it is cli…
Fiat Tipo (2016-2026 / 356, 357, 358) In this video, we see how to replace the LED bulb located in the storage compartment in front of the gear shift of a Fiat Tipo: we remove the front p…
Fiat Tipo (2016-2026 / 356, 357, 358) Learn how to remove the number plate light on a Fiat Tipo to replace the bulb. Use a screwdriver or plastic lever to remove the number plate light lo…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos