Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to adjust the height of the front headlights on a Fiat Tipo

Model: Fiat Tipo 356, 357, 358 - Years 2016-2026
Part: Headlight

To adjust the height of the front headlights on a Fiat Tipo, turn on the instrument panel and ensure the headlights are on. At this point, locate the panel with the headlight adjustment buttons, situated on the left side of the dashboard, near the steering wheel. Use the upper button to increase the height and the lower button to decrease it. It is advisable to make the adjustment while observing the light beam against a wall to verify the correct height. After setting the desired position, check that the headlights illuminate the road without dazzling other vehicles.

Posted on 24 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Interior Light Bulb in the Fiat Tipo?
How to Replace the Interior Light Bulb in the Fiat Tipo?
Fiat Tipo (2016-2026 / 356, 357, 358) To replace the interior light bulb in the Fiat Tipo, detach the ceiling light located inside the cabin, above the rear seats. Once the ceiling light …
How to Replace the Front Brake Pads of the Fiat Tipo?
How to Replace the Front Brake Pads of the Fiat Tipo?
Fiat Tipo (2016-2026 / 356, 357, 358) You can replace the front brake pads on the Fiat Tipo by lifting the car so that the corresponding wheel is not in contact with the ground: once the …
How to Replace the Front Brake Pads on a Fiat Tipo?
How to Replace the Front Brake Pads on a Fiat Tipo?
Fiat Tipo (2016-2026 / 356, 357, 358) To replace the front brake pads on a Fiat Tipo, lift the car using a jack or ramp so that the corresponding wheel is off the ground. Next, loosen the…

Other guides you may be interested in

How to Replace the Diesel Filter of the Peugeot 3008 1.5 BlueHDI

Briefly, we will see the main instructions for dismantling and replacing the diesel filter of the Peugeot 3008 1.5 BlueHDI. First, locate the diesel filter under the vehicle, so it will be necessary to lift it; then disconnect the electrical connector and the fuel lines from the filter, unscrewing the side screws to remove the cartridge, as shown in the video. At this point, replace the diesel filter with the new one, as well as with the original one; then reconnect the pipes and the electrical connector, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos