Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the battery located in the Fiat Scudo?

Model: Fiat Scudo MK 2 - Years 2007-2016
Part: Battery

In this video we can see where the battery is in the Fiat Scudo and how to proceed if we need to replace it. As shown, it is not positioned in the classic housing of the engine compartment but inside the passenger compartment, precisely below the panel located in front of the front right seat. To access it, it will be sufficient to first remove the mat and then the panel itself. On the other hand, to disassemble the battery we will have to disconnect both terminals, starting with the negative, unscrew the fixing bracket bolt with a 13mm wrench and extract it from the housing.

Posted on 3 March 2023 by ScegliAuto

Video tutorial

Related tutorials

Location of the Fiat Scudo battery
Location of the Fiat Scudo battery
Fiat Scudo (2007-2016 / MK 2) The guide shows where the Fiat Scudo battery is located. As with other light commercial vehicles, the battery location is located on the passenger co…
How to reset the Fiat Scudo oil light
Fiat Scudo (1996-2007 / MK 1) The service light that comes on on the instrument panel of your Fiat Scudo Mk1 is fortunately just a reminder that you need to have your vehicle serv…
How to replace the cabin air filter of the Fiat Scudo
How to replace the cabin air filter of the Fiat Scudo
Fiat Scudo (2007-2016 / MK 2) If you want to independently replace the air filter located in the cabin of your Fiat Scudo, you just need to read the following guide and put into p…

Other guides you may be interested in

    Frequently Asked Questions

    • Scudo 2007-2016 - Where is the battery located in my Fiat Scudo? Read answer

How to Install Roof Bars on a Fiat 500L

Learn how to fit universal roof bars on a Fiat 500L. These bars are used on vehicles with or without roof rails. Assemble the roof bar kit (as shown in the video) with bars adjusted to the width of the vehicle (measure with a tape measure). Position the brackets at both ends of the doors on the vehicle's original roof rails. Once the anchoring bracket width is set, tighten the bolts with a butterfly nut (if a lock is present) until fully secured to the roof rails. Fit safety caps on both sides.

Watch the video!


by ScegliAuto

More videos