Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Oil on a Fiat Ducato

Model: Fiat Ducato X290 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Engine oil

See other generations:
Video tutorial

If you want to carry out the engine oil and filter replacement on this model of vehicle yourself, the following description outlines the procedures and instructions to follow for this operation. After opening the bonnet and lifting the vehicle, proceed to open the oil filler cap and unscrew the drain plug located at the side of the oil sump.

Collect the used oil in a container and then use the appropriate spanner to unscrew the oil filter. Next, take the new filter and screw it on after replacing the gasket.

Then, close the oil drain plug and proceed to fill the circuit with the new lubricant from above the engine compartment.


Updated on 18 July 2026 by ScegliAuto


Related tutorials

How to Change the Reverse Light Switch in a Fiat Ducato Camper
How to Change the Reverse Light Switch in a Fiat Ducato Camper
Fiat Ducato (2002-2006 / ) This video tutorial explains how to change the reverse light switch in a Fiat Ducato camper if it fails. Sometimes, the wire on the connector located…
How to Replace the Timing Belt on a Fiat Ducato 2.3
How to Replace the Timing Belt on a Fiat Ducato 2.3
Fiat Ducato (2006-2014 / X250) In this very short video tutorial, learn how to replace the timing belt on a Fiat Ducato produced from 2006 to 2014. This operation is complicated an…
How to Replace the Gear Oil of the Fiat Ducato 2.3 Multijet
How to Replace the Gear Oil of the Fiat Ducato 2.3 Multijet
Fiat Ducato (2006-2014 / X250) Follow the procedure to drain and refill the transmission oil of the Fiat Ducato as part of regular maintenance. First, lift the vehicle and start un…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos