Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

The Procedure to Replace the Cabin Air Filter in the Fiat Toro

Model: Fiat Toro MK 1 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Cabin air filter

Video tutorial

The first thing you need to do is purchase a new cabin air filter. The second step is to get in the vehicle and turn off the engine, then pull the handbrake.

The cabin air filter in this vehicle is located behind the glove compartment, so lower the glove box and remove all items inside it; take off the side panel and unscrew the screws located at the top of the glove compartment with a Torx wrench; at this point, by releasing the pins, the glove box will lower completely, exposing the cabin filter cover, so remove the cover, take out the filter, clean the housing, and install the new cabin filter following the airflow direction indicators.


Updated on 21 July 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Fiat Toro?
How to Reset the Service Light on a Fiat Toro?
Fiat Toro (2016-2024 / MK 1) To reset the Service light that appears on the instrument cluster of a Fiat Toro, insert the ignition key into the corresponding slot. Turn it to pow…
How to Reset the Service Light on a Fiat Toro?
How to Reset the Service Light on a Fiat Toro?
Fiat Toro (2016-2024 / MK 1) To reset the Service light on a Fiat Toro, turn on the instrument cluster by turning the ignition key in the ignition switch. Once the instrument clu…
Replacement of the front fog lamp of the Fiat Toro
Replacement of the front fog lamp of the Fiat Toro
Fiat Toro (2016-2024 / MK 1) In this video tutorial we will see the steps that will allow us to disassemble and replace the front fog light bulb of the Fiat Toro. First of all, l…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos