Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the cabin filter of the Fiat Toro

Model: Fiat Toro MK 1 - Years 2016-2024
Part: Cabin air filter

In this video, we will see how to change the cabin air filter of the Fiat Toro. The filter is changed by removing the cover from the dashboard thickness, on the passenger side (so on the right side, in most cases), where underneath we find a T25 torx screw to remove in order to access our filter; in fact, by doing this, opening the glove compartment door will make it free, no longer anchored to its fastening. Now we remove three upper screws that are clearly visible and two lower screws (which are more difficult to see), in order to completely remove the glove compartment. Behind it, we find the air filter behind a metal bracket, which must also be removed in order to extract the filter drawer: We clean the container of dust and debris before putting in the new and clean filter, then we close the drawer, reattach the bracket, and close the five screws plus the side one to secure the drawer back in place.

Posted on 26 January 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Air Filter in a Fiat Toro
How to Replace the Cabin Air Filter in a Fiat Toro
Fiat Toro (2016-2024 / MK 1) To replace the cabin air filter in your Fiat Toro, follow these steps. First, completely turn off the vehicle and park it safely. Next, go to the fro…
Replace Engine Oil and Oil Filter on the Fiat Toro
Fiat Toro (2016-2024 / MK 1) Today, let's go through the procedure to perform the routine maintenance service by replacing the engine oil and oil filter on the Fiat Toro. First, …
How to Regenerate the Diesel Particulate Filter on a Fiat Toro
How to Regenerate the Diesel Particulate Filter on a Fiat Toro
Fiat Toro (2016-2024 / MK 1) To regenerate the diesel particulate filter on a Fiat Toro, the vehicle will indicate that it is performing the regeneration and that you should keep…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos