|
Do it yourself
| |||
| ||||
|
To replace the handle on this model of car, follow the steps outlined below. First, remove the inner door panel. Then, unscrew the screws securing the handle from the inside to free it for removal from the outside. Be careful to disconnect the lock release cable located behind, and then take the new lock and install it by reversing all the steps.
Updated on 30 July 2026 by ScegliAuto
This video is currently unavailable
Related tutorials
Fiat 500
(2007-2021 /
312)
Before you start, open the door of your Fiat 500. Begin by removing the door panel, disengaging the clips, unscrewing the fixing screws, and finally …
Fiat 500
(2007-2022 /
312)
Today, let's see how to remove and replace the external door handle of the front door on the Fiat 500, as well as on other models from the manufactur…
Fiat 500
(2007-2021 /
312)
Removing the external handle of the 500? Start by unscrewing the securing pins in the fixed handle on the door panel with a screwdriver, then unscrew…
Other guides you may be interested in
|
How to Check the Oil Level on a Jeep Renegade?
To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.107
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
