Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Throttle Body on a Fiat Punto?

Model: Fiat Punto MK 2, 188 - Years 1999-2011
Part: Throttle body

In this tutorial, you will learn how to remove the throttle body on a Fiat Punto MK2, a very simple and quick operation. First, ensure the engine is completely cool for safety. Then, open the bonnet and remove the air filter box. Next, disconnect the sensor on the left, also disconnect the throttle cable and remove its support. Now, you can unscrew the three throttle body bolts using a Torx T30 spanner and remove it from the engine. To install the replacement, simply follow the reverse procedure.

Updated on 31 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to learn about the throttle body on a Punto 188
How to learn about the throttle body on a Punto 188
Fiat Punto (1999-2011 / MK 2, 188) In this video, we can follow the self-learning procedure of the throttle body of a Fiat Punto 188, which in this case is one of the simplest. After r…
How to Dismantle and Clean the Throttle Body of the Fiat Punto Evo 1.2
How to Dismantle and Clean the Throttle Body of the Fiat Punto Evo 1.2
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this video, we will see the main steps to dismantle and replace the throttle body of the Fiat Punto Evo 1.2, as well as the Grande Punto. First, o…
How to clean the throttle body of a Fiat Punto
How to clean the throttle body of a Fiat Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this video we can see how to clean the throttle body of a Fiat Punto 188: we will need a specific cleaner, which we can find for example on Amazon…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos