Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Service Light on a Fiat Bravo

Model: Fiat Bravo Bravo 2 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Service warning light

See other generations:
Video tutorial

After changing the engine oil on a Fiat Bravo, you need to reset the system that alerts you to this operation. To do this, connect a PC to the car via the EOBD port, which is located behind a small cover at the bottom left of the steering column.

To remove it, unscrew the three screws that hold it in place. Once removed, insert the connector and connect it to the PC with the "MultiECU Scan" program installed via a USB port.

Launch the program and select the port and hardware type used from the Settings. In the main menu, select the make and model of the car, "service indication" and "Service interval reset", then click on "connect". Turn on the dashboard, and once connected, click on "adjustment" and then on "reset distance to next service", confirm, and once done, disconnect.

Return to the main menu, select "engine control" and click on "connect". In the next menu, select "adjustment" and "oil replacement" and execute. At the end of the procedure, turn off the dashboard and wait 60 seconds.

After this time, start the engine to verify that the reset has occurred.


Updated on 1 August 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on the Fiat Bravo?
How to Reset the Service Light on the Fiat Bravo?
Fiat Bravo (2007-2014 / Bravo 2) The procedure to reset the Service light on the instrument panel of the Fiat Bravo requires connecting a diagnostic tool to the vehicle's OBD port: o…
How to Reset the "Service" Light on a Fiat Bravo 1.4
How to Reset the "Service" Light on a Fiat Bravo 1.4
Fiat Bravo (2007-2014 / Bravo 2) Before starting, sit in the driver's seat of your Fiat Bravo 1.4. Activate the instrument cluster by turning the key in the ignition switch. Next, re…
How to Reset the "Service" Light on a Fiat Bravo
How to Reset the "Service" Light on a Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) Before you begin, sit in the driver's seat of your Fiat Bravo. Start by activating the instrument cluster by turning the key in the ignition switch. …

Other guides you may be interested in

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos