Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the TPMS (Tyre Pressure Monitoring System) on a Fiat 500?

Model: Fiat 500 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Tire pressure warning light

See other generations:
Video tutorial

As shown in the video, the tyre pressure of the Fiat 500 was below the recommended level, so bring the pressure back to the correct level. However, once you start the car, the TPMS light remains on, and the display on your dashboard shows 'Check - To reset, see the menu.' The Menu button is located on the right side of the driver, next to the dashboard, and is the lowest button.

The other two buttons are used to navigate within the menu. Press and hold the Menu button until the time appears on the dashboard.

Release it and press again. Use the other buttons to navigate to 'Reset Tyre.' Press the Menu button again, and it will ask if you want to reset; press yes, then the Menu button, and confirm.


Updated on 2 August 2026 by ScegliAuto


Related tutorials

How to Reset the TPMS on a Fiat 500L
How to Reset the TPMS on a Fiat 500L
Fiat 500 (2012-2023 / 500 L) To reset the low-pressure sensor on a Fiat 500L, after checking and restoring the correct tyre pressures (see the user manual), perform the following…
How to Reset the Tyre Pressure Warning Light on the Fiat 500
How to Reset the Tyre Pressure Warning Light on the Fiat 500
Fiat 500 (2007-2024 / 312) Today, discover the procedure to reset the tyre pressure warning light (TPMS) on the Fiat 500. Before performing the reset, ensure all four tyres are…
Tyre Pressure Monitoring System for Fiat 500
Tyre Pressure Monitoring System for Fiat 500
Fiat 500 (2014-2022 / 500 X) The Fiat 500 is equipped with a TPMS that monitors the tyre pressure of the vehicle. Sensors mounted on the wheels detect the pressure of each indivi…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos