Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Dynamo Belt on a Classic Fiat 500

Model: Fiat 500 Epoca - Years 1957-1975
Part: Checks and maintenance

In this video, see how to replace the dynamo belt on a classic Fiat 500: first, check its wear condition. It should flex by about 1 cm. If you need to replace it, purchase a new one; you can find it on eBay with the code 181675565207 for £9.00 plus £8.00 delivery. To replace it, pull the handbrake, engage fourth gear (engine off), insert a flat screwdriver between the engine pulley and the belt, and try to remove the belt from the pulley. For installation, place the belt on the dynamo and the engine pulley, starting from the top, then gently push the car forward, and the belt will settle itself. Run the engine for a couple of minutes, and the belt will be in place.

Updated on 5 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Remove Alternator from Fiat 500
Remove Alternator from Fiat 500
Fiat 500 (2007-2024 / 312) Removing the alternator from a Fiat 500? Remove the front right wheel to carry out the removal. Unscrew the nuts with a socket, being careful not to …
How to Replace the Auxiliary Belt on a Fiat 500
Fiat 500 (1957-1975 / Epoca) Before starting, open the rear engine cover of your Fiat 500. Begin by unscrewing and removing the three 10mm bolts that secure the dynamo sprocket c…
Timing Instructions for Classic Fiat 500
Timing Instructions for Classic Fiat 500
Fiat 500 (1957-1975 / Epoca) Let’s look at some important instructions for timing the two-cylinder engine of a classic Fiat 500. First, find the top dead centre by rotating the c…

    Frequently Asked Questions

    • 500 2007-2022 - What does the parking assistance not available on the Fiat 500 mean? Read answer
    • 500 2007-2022 - Why does the trunk of the Fiat 500C not open? Read answer
    • 500 2007-2022 - How much does the panoramic roof cost in the Fiat 500? Read answer
    • 500 2007-2024 - Why is the USB port of the Fiat 500 not working? Read answer
    • 500 2007-2024 - What does the message "Start & Stop not available" mean in the Fiat 500? Read answer
    • 500 2014-2022 - In what position is the passenger compartment filter on the Fiat 500x? Read answer
    • 500 2012-2023 - What does "Anomaly P2930" mean on a Fiat 500L? Read answer
    • 500 2007-2024 - Why does the Fiat 500 Start & Stop not work? Read answer
    • 500 2014-2022 - What does the wording "Service expired" on the Fiat 500X mean? Read answer

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos