Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : Remove the alternator of the Fiat 500

Fiat 500 - Video tutorial

Model: Fiat 500 312 - Years 2007-2023
Part: Alternator
Operation: Remove the alternator of the Fiat 500

Disassembly of the alternator of the Fiat 500? We disassemble the right front wheel to carry out the disassembly. We unscrew the pins with a socket wrench, being careful not to damage the nearby parts, we unscrew all the clamping pins of the alternator. Once the disassembly is finished, let's pull it away from the engine compartment (disconnect the belt). We take the new replacement part and insert it into the suitable housing, screw in the locking pins, then tighten the side pins of the alternator and mount the belt. We check the right voltage with a tester by connecting it to the battery. We turn on and test the charging operation.


Posted on 15 December 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • 500 2007-2022 - Where is the Fiat 500 alternator located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos