Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Lower Dashboard of the Fiat Ducato

Model: Fiat Ducato MK 2 - Years 1993-2016
Part: Dashboard

Removing the lower dashboard of the Fiat Ducato camper is a very simple operation that usually needs to be done alongside other tasks such as replacing the antenna or repairing some wiring. Start by removing the glove compartment. Then unscrew the screws of the drawer and pull it out of its housing. Next, remove the two screws that secure the dashboard itself; one screw is located on the lower right and the other on the lower left. Once the two screws are removed, you can extract the dashboard.

Updated on 6 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the OBD port located in the Fiat Ducato?
Where is the OBD port located in the Fiat Ducato?
Fiat Ducato (2014-2026 / X290) To locate the OBD port of your Fiat Ducato, you must follow the few simple steps described in this new guide dedicated to you. First, you need to rea…
Guide to Replacing the Dashboard Bulbs on the Fiat Ducato
Guide to Replacing the Dashboard Bulbs on the Fiat Ducato
Fiat Ducato (2006-2014 / X250) Follow this guide to remove and replace the dashboard lights on the Fiat Ducato, following the instructions below. First, get inside the vehicle and …
How do you replace the cabin fan resistor of the Fiat Ducato?
How do you replace the cabin fan resistor of the Fiat Ducato?
Fiat Ducato (1993-2016 / MK 2) In order to replace the cabin fan resistor of the Fiat Ducato, you will need to loosen the screws and remove the rivets that secure the lower dashboa…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos