Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Replacing the Timing Belt on a Fiat Ducato

Model: Fiat Ducato X250 - Years 2006-2014
Part: Timing belt

Today, we will discover the procedure for removing and replacing the timing belt on a Fiat Ducato, following the instructions below. First, open the bonnet and start removing the right front headlamp and the front bumper by unscrewing all the fixing screws; then, remove the engine mount and lift the vehicle, as shown in the video. At this point, remove the timing cover and take the necessary references for replacing the timing belt, also replacing the water pump kit if necessary.

Updated on 23 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Guide to Replacing the Timing Belt of the Fiat Ducato 2.3 MultiJet
Guide to Replacing the Timing Belt of the Fiat Ducato 2.3 MultiJet
Fiat Ducato (2006-2014 / X250) Let's look at the instructions on how to disassemble and replace the timing belt of the Fiat Ducato 2.3 MultiJet. First, we open the vehicle's hood a…
Guide to replacing the timing belt of the Fiat Ducato 3.0 Diesel
Guide to replacing the timing belt of the Fiat Ducato 3.0 Diesel
Fiat Ducato (2006-2014 / X250) Today we will discover the main information useful for disassembling and replacing the timing belt of the Fiat Ducato 3.0 Diesel. In order to access …
Guide to Replacing the Timing Belt on the Fiat Ducato Camper
Guide to Replacing the Timing Belt on the Fiat Ducato Camper
Fiat Ducato (2014-2026 / X290) Today, we will discover the main steps that illustrate the procedure for removing and replacing the timing belt on the Fiat Ducato Camper. To access …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos