Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Eliminate the Brake Squeal of the Fiat Tipo

Model: Fiat Tipo 356, 357, 358 - Years 2016-2026
Part: Brake pads

Learn how to eliminate that annoying squeal you may hear when braking with the Fiat Tipo. Lift the car and remove one of the front wheels. Use a spanner to hold a bolt in place while you use another to unscrew the screw that secures the brake caliper. Once done, rotate it upwards. Remove one brake pad and, using a grinder, chamfer the edge of the friction material. Clean the seat with a special spray and apply copper grease to the mounting points and the back of the pad. Refit the pad and reposition the caliper, securing it with its screw, adding a drop of threadlock. Refit the wheel with the correct torque and repeat the same operations on the other wheel.

Updated on 29 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Brake Pads on a Fiat Tipo?
How to Replace the Front Brake Pads on a Fiat Tipo?
Fiat Tipo (2016-2026 / 356, 357, 358) In this tutorial, you will see how to replace the front brake pads on a Fiat Tipo. This is a simple operation but requires attention. Start by liftin…
How to Replace the Brake Pads on a Fiat Tipo
How to Replace the Brake Pads on a Fiat Tipo
Fiat Tipo (2016-2026 / 356, 357, 358) To replace the brake pads on your vehicle, follow the instructions below. First, remove the wheel to access the two bolts securing the caliper. Once …
How to Remove the Rear Lights on the Fiat Tipo 356
How to Remove the Rear Lights on the Fiat Tipo 356
Fiat Tipo (2016-2026 / 356, 357, 358) In this video, you will learn how to remove the rear lights from a 2017 Fiat Tipo 356. First, move to the rear and open the boot lid; then remove the…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos