Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Power Steering Pump on the Fiat Croma

Model: Fiat Croma MK 1 - Years: 2005, 2006, 2007, 2008, 2009, 2010
Part: Pump

Video tutorial

This guide will show you how to remove and replace the power steering pump on the Fiat Croma. First, raise the vehicle and disconnect the exhaust manifold to access the power steering pump by undoing the securing nuts; then, unscrew the pump's fixing screws to remove it, as shown in the video.

At this point, install the new power steering pump, topping up with the appropriate oil in the designated reservoir; start the engine to circulate the fluid, following the video tutorial to the end!


Updated on 2 September 2026 by ScegliAuto


Related tutorials

Installation of Auxiliary Power Cable for Power Steering Pump on Fiat Croma
Installation of Auxiliary Power Cable for Power Steering Pump on Fiat Croma
Fiat Croma (2005-2010 / MK 1) If the steering suddenly becomes stiff and the power steering warning light remains on the dashboard, first check the fault memory in the electro-hyd…
Remove the Original Radio from Fiat Croma
Remove the Original Radio from Fiat Croma
Fiat Croma (2005-2010 / MK 1) How to remove an original radio from a Fiat Croma? Follow these guidelines carefully to execute the removal. Use the original or aftermarket metal ke…
How to Reset the Service Light on the Fiat Croma?
How to Reset the Service Light on the Fiat Croma?
Fiat Croma (2005-2010 / MK 1) To reset the Service light that appears on the instrument panel of the Fiat Croma, connect a diagnostic tool to the vehicle's OBD port, located just …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos