Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the main beam bulb on the Fiat 500

Model: Fiat 500 - Years 2007-2022
Part: Headlight bulb

Today's guide will show you how to remove and replace the main beam bulb of the front headlamp on the Fiat 500. First, lift the vehicle and remove the front wheel to gain access by unscrewing the bolts; then remove the plastic cover located in the front wheel arch, as shown in the video. At this point, disconnect the electrical connector of the bulb by releasing the metal clip to remove it and replace it with the new one (with the same fitting); then refit the new main beam bulb by reversing the procedure!

Updated on 2 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlamp Bulbs in the Fiat 500X
Fiat 500 (2014-2022 / 500 X) Today, we will look at the instructions that will allow you to remove and replace the front headlamp bulb, both the main beam and the dipped beam, in…
How to replace the daytime running light of the Fiat 500
How to replace the daytime running light of the Fiat 500
Fiat 500 (2007-2024 / 312) To replace the front daytime running light bulb of the Fiat 500, start by going to the inner wing on the driver's side, remove a cover from the panel…
How to Replace the Rear Light Bulb on the Fiat 500
How to Replace the Rear Light Bulb on the Fiat 500
Fiat 500 (2007-2021 / ) If you need to replace the rear light bulb on your Fiat 500 yourself, just follow the instructions in this mini guide. Before proceeding, remember to…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos