Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Fiat
  4. :
  5. 500
  6. : How to restore the engine of a vintage Fiat 500

Fiat 500 - Video tutorial

Model: Fiat 500 Epoca - Years 1957-1975
Part: Engine
Operation: How to restore the engine of a vintage Fiat 500

When you decide to restore an engine, you don't have to limit yourself to a simple overhaul or a more in-depth maintenance; in order to really talk about restoration, the engine must be completely disassembled down to the last screw, every single piece must be washed, degreased and checked to exclude that it may show any damage; in the subsequent reassembly phase, it is advisable to install new gaskets, new bearings, oil seals, piston rings, bushings, spark plug cables, etc., respecting the tightening torques and suitably adjusting the valve clearance; It is also advisable to repaint the sheet metal parts with a specific paint for high temperatures: the final result will be excellent.


Posted on 16 September 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • 500 2012-2023 - What problems does the 1.3 engine of the Fiat 500L have? Read Answer
    • 500 2007-2022 - What does the engine malfunction light indicate in the Fiat 500 1.3 MultiJet? Read Answer
    • 500 2014-2022 - What to do when the start-stop light comes on in the Fiat 500X? Read Answer
    • 500 2007-2022 - What problems could the timing variator of the Fiat 500 present? Read Answer
    • 500 2014-2022 - How many km can a Fiat 500 do? Read Answer
    • 500 2007-2022 - Why did the yellow engine failure light come on in the Fiat 500? Read Answer
    • 500 2007-2021 - Where is the starter motor located in the Fiat 500? Read Answer
    • 500 2007-2021 - Why does the engine warning light come on on the Fiat 500 1.3 multijet? Read Answer
    • 500 2007-2022 - What are the tightening torque values on the Fiat 500 engine? Read Answer
    • 500 2014-2022 - What to do if the yellow engine warning light comes on in the Fiat 500X? Read Answer
    • 500 2012-2023 - Where do you get the tightening torques of the Fiat 500 Twinair? Read Answer
    • 500 2014-2022 - "Check engine" warning light on Fiat 500X, what to do? Read Answer
    • 500 2014-2022 - Why is the Start & Stop of the Fiat 500x not available? Read Answer
    • 500 2012-2023 - How many cc are the petrol engines on Fiat 500l? Read Answer
    • 500 2007-2023 - What does the "engine failure" warning light indicate on my Fiat 500? Read Answer
    • 500 2012-2023 - What does the ignition of the engine fault warning light mean in a 500 1.2 petrol engine? Read Answer
    • 500 2007-2023 - What does the flashing engine light mean in the Fiat 500? Read Answer
    • 500 2007-2023 - Fiat 500 Abarth engine warning light, what can it depend on? Read Answer
    • 500 2012-2023 - What does the Have the Engine Checked Light on the Fiat 500L mean? Read Answer
    • 500 2014-2022 - What can be caused by the yellow engine light on a Fiat 500X? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos