Do it yourself
| ||||
|
Fiat 500 - Video tutorial
Model: Fiat 500
312
- Years 2007-2023 In order to replace the engine oil of the Fiat 500, you need to loosen the drain plug located in the lower part of the engine compartment: once this plug is loosened, you can drain all the old oil into a properly positioned container. Once the oil has completely drained, you can tighten the plug again and open the hood: this way you can locate the oil filter at the bottom left of the engine block. By replacing it with a new one, you can then pour the engine oil through the breather on the left side of the engine block.
Posted on 20 February 2024 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow do I unlock the fuel filler flap of the Opel Meriva B?To be able to unlock the fuel filler flap of the Opel Meriva B when it is locked, you need to have an object that acts as a lever to be able to move the inner wheel arch cover. By inserting your hand inside, you will need to pull the latch that blocks the door from the inside, as shown in the video. The fuel flap can be opened by pulling the latch from the inside. The problem depends on the motor of the mechanism: by going to the dealership it will be possible to replace the entire piece, which will be under warranty for two years and will allow you to refuel in peace. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.069
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |