Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Fuse Box to Replace the Fog Light Bulb

Model: Fiat Punto MK 2, 188 - Years 1999-2011
Part: Fuse box

The first step is to disconnect the battery cable to avoid any short circuits. Disconnect the negative terminal first, followed by the positive terminal. Remove the cover of the fuse box and unscrew the securing screws to take it out. Move the fuse box sideways; for more space, it is advisable to also remove the battery and its container by unscrewing the three screws at the bottom. At this point, you can easily replace the burnt bulb. Refit the battery container and reposition the battery and the fuse box.

Updated on 2 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Fog Light Bulb on the Fiat Grande Punto
How to Replace the Fog Light Bulb on the Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) This guide shows how to replace the fog light bulb on the Fiat Grande Punto. The bulb replacement is very simple as you need to disconnect the power …
How to Change the Fog Light Bulb on a Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) If the fog light bulb has blown and you have some tools and good manual skills, replacing it is a DIY task you can complete by following these simple…
Fuse Box of the Fiat Punto
Fuse Box of the Fiat Punto
Fiat Punto (1993-1999 / MK 1, 176) This vehicle has two main fuse boxes. The first is located in the cabin on the left side at the bottom of the dashboard and is protected by a plastic…

Other guides you may be interested in

    Frequently Asked Questions

    • Punto 1999-2011 - Where is the fuse of the reversing light of the Fiat Punto located? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos