Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the turn signal bulb in the Fiat Ducato?

Model: Fiat Ducato MK 2 - Years 1993-2016
Part: Light bulb

In the demonstration shown in the video, complete with verbal description, the process of replacing the bulbs is shown, which is the same for both the turn signals and the position, low beam, etc. lights. With a few tools and some manual dexterity, the job will be simple for any user. First, open the hood of the engine compartment, then remove the upper protection of the front mask of the vehicle, remove the two screws that secure the headlight unit, and remove it from its seat. The last step is to release the metal clips of the rear cap and remove the bulb holder, from which the bulb to be replaced is pulled and the new one is installed.

Posted on 10 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Indicator Bulb in the Wing Mirror of the Fiat Ducato
How to Replace the Indicator Bulb in the Wing Mirror of the Fiat Ducato
Fiat Ducato (2014-2026 / X290) In this guide, you will find instructions to remove and replace the indicator bulb in the external wing mirror of the Fiat Ducato. First, move to the…
Replacing Indicator Bulb in Fiat Ducato x250 Wing Mirror
Fiat Ducato (2006-2014 / X250) In today's tutorial, you will learn how to remove the indicator bulb from a Fiat Ducato x250. The video shows the mirror disassembled: first, unscrew…
How do you replace the front turn signal bulb of the Fiat Ducato?
How do you replace the front turn signal bulb of the Fiat Ducato?
Fiat Ducato (2006-2014 / X250) In order to replace the front turn signal bulb of the Fiat Ducato, you need to loosen the screws that secure the corresponding side spotlight located…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos