Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery and restore the Start&Stop system of the Fiat 500X

Model: Fiat 500 500 X - Years 2014-2022
Part: Battery

These short and simple steps will show us how to disassemble and replace the engine battery of the Fiat 500X, restoring the operation of the Start&Stop system. First of all, let's open the engine hood and begin to unscrew and remove both battery terminals (positive and negative); then let's remove it from its compartment and replace it with the new one, of the correct type and with the same amperage, as shown in the video. At this point, we will restore the operation of the Start&Stop system, which can be temporarily deactivated from the dedicated button on the dashboard.

Posted on 18 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you deactivate the Start&Stop of the Fiat 500X?
How do you deactivate the Start&Stop of the Fiat 500X?
Fiat 500 (2014-2022 / 500 X) In order to deactivate the Start&Stop system of the Fiat 500X, you need to turn on the instrument panel by inserting the ignition key into the corres…
How to Emergency Start the Fiat 500X
How to Emergency Start the Fiat 500X
Fiat 500 (2014-2022 / 500 X) In today's video, you will learn how to emergency start the Fiat 500X. This procedure is specifically for models equipped with keyless entry, meaning…
How to Reset the Oil Maintenance Service on a Fiat 500X
How to Reset the Oil Maintenance Service on a Fiat 500X
Fiat 500 (2014-2022 / 500 X) How to reset the oil maintenance service on a Fiat 500X? This is a very simple operation; enter the vehicle, turn on the instrument panel with the ap…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos