Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fitting New Leather Seat Covers Accessory Kit

Model: Fiat 500 312 - Years 2007-2024
Part: Accessory kit

Obtain the leather seat cover kit. Once the package is opened, check its contents, then take the first cover and the corresponding clips and apply it to the seat, ensuring the front part adheres to the edge of the seat. Next, tuck the rear part between the seat base and the backrest. Push the two securing elastics under the backrest, passing them under the seat. Retrieve the other two elastics from the front part and attach them under the seat to the rear ones. Position the elastics so that they are not accidentally removed by the feet of rear passengers. Repeat the same operation on the other seat.

Updated on 2 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Installing Pedal Covers for Fiat 500 Manual Gearbox
Fiat 500 (2007-2024 / 312) In this video, see how to install a pedal cover kit on a Fiat 500 with a manual gearbox. We couldn’t find the kit from the video, but we found a very…
Fitting the Boot Handle on the Fiat 500
Fitting the Boot Handle on the Fiat 500
Fiat 500 (2007-2022 / 312) An accessory that may seem insignificant at first glance but can be very useful, especially on the Fiat 500, is the boot handle. Indeed, at the back …
Instructions for Installing the Spare Wheel
Instructions for Installing the Spare Wheel
Fiat 500 (2007-2024 / 312) Many new generation cars no longer come with a spare wheel but are supplied with a puncture repair kit, and the spare wheel has been included in the …

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos