Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the gear lever gaiter and knob of the Fiat Panda 169.

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Shifter boot

If the gear knob of the Fiat Panda is loose and does not stay in its position but rotates freely, we can consider replacing it. Grip it firmly and pull it to the side to remove it, unlock the base of the cover and remove everything together with the spring. Cut the strap and retrieve the cylinder that slides on the rod, take the replacement kit, insert the cover at the base of the cylinder and secure it with the velcro and a new Velcro strap. Slide the cylinder onto the rod and lock the base of the cover, place the spring at the base of the knob, insert the knob onto the rod and using a rubber hammer, lock it into position.

Posted on 13 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How to replace the gear knob and gaiter of the Fiat Panda
How to replace the gear knob and gaiter of the Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) The instructions in this guide will show us the disassembly and replacement process of the gear knob and gear lever gaiter of the Fiat Panda. First o…
How to Replace the Gear Gaiter on the Fiat Panda
How to Replace the Gear Gaiter on the Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) To replace the gear gaiter on the Fiat Panda, follow these steps: start by pulling the gear knob upwards, remove the spring from the knob, then pull …
Replacing the Gear Gaiter on Fiat Panda
Replacing the Gear Gaiter on Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Need to replace the gear gaiter on a Fiat Panda? Here’s how to remove the damaged gaiter from the top of the gear lever. Remove the gear knob from th…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos